Industrial Freezer Repairs
OVERVIEW: Phoscrete MALP concrete repair materials are an excellent choice for fast cold temperature repairs and are especially suited for industrial freezers. Phoscrete is a cementitious two-component system (dry mix bags, and liquid activator jugs). Phoscrete does not mix with water, and the activator freezing point is -20°F (-29°C). Phoscerte bonds strong and lasts long…
Vertical and Overhead Patches
OVERVIEW: Because it sticks fast and holds strong to concrete, Phoscrete VO MALP concrete repair material is an excellent choice for repairing concrete on vertical and overhead surfaces including bridge beams and columns. Phoscrete VO is a trowelable repair material that sets fast and bonds to itself, so it can be installed in lifts. Phoscete…
Horizontal Spall Patches
OVERVIEW: Repair concrete spalls on pavements, bridge and parking decks fast! Phoscrete HC is an easy-to-use MALP concrete repair material that bonds strong and lasts long. Phoscrete is traffic-ready in less than one hour so you can repair more in one lane closure. Phoscrete works fast even in sub-freezing temperatures. With similar properties to the…
Precast Panel Repairs
OVERVIEW: Phoscrete VO is an excellent choice for fast, quality repairs of damaged precast concrete panels. Phoscrete bonds strong to clean cured concrete with no cold joints. Phoscrete VO contains no large aggregates so it can be feather-edge-finished. As soon as 15 minutes following initial set, Phoscrete can be finished to spec using a diamond-wheel…
Expansion Joint Headers
OVERVIEW: Complete your expansion joint repairs (header and seal) in one lane closure! Phoscrete is especially well-suited for installation and repair of expansion joint headers. Phoscrete is traffic-ready in less than one hour and can accept joint sealants as soon as 15 minutes following initial set. Unlike elastomeric products, Phoscrete is a cementitious concrete repair…
Shotcrete Repairs
OVERVIEW: Phoscrete SG is a dry-shotcrete/gunite MALP concrete repair material. Phoscrete SG two components (dry mix bags and liquid activator drum) are pneumatically-conveyed and mixed at the nozzle. Phoscrete bonds fast and strong to clean dry concrete and to itself, wet or cured. No primers or curing compounds are required, and Phoscrete stops rust on…